Important - Peg-Perego adapters for car seat Instrucciones De Uso

EN_English
Thank you for buying a PegPerego product
Adapters for car seat are PegPerego
accessories compatible with the
following items:
Ypsi, Veloce,
Vivace.
They are approved for use with the car
seats of other manufacturers and for
children from birth up to a maximum
weight of 13kg.
Adapters for car seat are compatible
with the car seats listed in the
compatibility table on the Peg Perego
website: www.pegperego.com
WARNING
IMPORTANT: Read the
instructions carefully
before use and keep for
future reference.
Your child's safety could
be at risk if you do not
follow these instructions.
_ Attach the adapters onto
the chassis before attaching
the infant car seat.
_ WARNING: Check the
adapters are properly
attached onto the chassis
and the infant car seat
is properly attached to
the adapters every time
before using.
_ Do not fasten the car seat
to the chassis if the child
weighs more than 13 kg.
_ WARNING: Always use the
restraint system.
_ WARNING: When using
the infant car seat in the
car, check the adapters
are not attached onto the
infant car seat. Remove
the adapters from the
infant car seat before
installing it in the car.
_ The adapters must always
be attached onto the
chassis. Never use the
infant car seat with the
adapters attached unless
it is being used on the
chassis.
_ Do not let the child play
with this product.
_ The assembly and
preparation of the
product must be carried
out by an adult
_ Do not use this item if
any parts are missing or
broken.
INSTRUCTIONS FOR USE
1 Fasten the adapters to the corresponding
positions on the frame with the release button
facing forward (away from the frame's handle
bar), and ensure they click into place. Then,
ensure they have engaged correctly by pulling
the adaptors upward.
2 You can now engage the car seat in the rear-
facing position, ensuring it clicks into place.
To remove the car seat from the frame, please
refer to the car seat instruction manual.
3 To disengage Adapters for car seat from
the chassis: disengage the car seat from the
adapters, press the button (1) and lift (2).
5