Maintenance - Husky STICK225 Guía De Uso Y Cuidado

Maintenance

□ Before each use, inspect the general condition of the welder. Check for loose screws, cracked or broken parts, damaged circuit wiring
or cables, and any other potential risks that may cause safety issues. Replace damaged or worn parts, cords/cables or gun assembly.
□
After each use of the welder, clean external surfaces of the welder with clean cloth.
□
Periodically clean the welder using compressed air to blow out all dust and debris from the interior.
□
If the unit continuously shuts down due to thermal overload, please turn off the welder and have a qualified electrician inspect the
welder and repair it.
□
Store the welder and accessories in a clean and dry location out of reach of children.
9
Please contact 1-888-43-HUSKY for further assistance.
HUSKYTOOLS.COM