Troubleshooting - Permobil M2 Manual De Instrucciones

Comfort Cushions - M2, ACTA-EMBRACE, Curve Operation Manual

TROUBLESHOOTING

For additional assistance, contact the equipment provider, distributor, or
Customer Support.
The cushion is
uncomfortable
or unstable.
The cushion
slides on the
wheelchair.
A component is
damaged.
» Confirm that the contoured foam faces up and the
zipper is in the back.
» Confirm that the cushion is centered beneath the
individual.
» Confirm that the cushion is properly sized to the
individual and the wheelchair.
» Confirm that there are no obstructions between the
cushion and the seating surface.
After confirming, allow the individual at least one hour
to adjust to the cushion.
» Make sure the non-skid bottom of the cushion cover
is facing down.
» When possible, use hook and loop fasteners to
further secure the cushion to the seating surface.
Hook fasteners are not provided with the product.
» If using an ATI with the M2 Cushion or the ACTA-
EMBRACE Cushion, place the ATI inside the
cover and beneath the cushion (and beneath
the Incontinence Liner, if using). Refer to the ATI
instructions for placement and adjustment.
Contact Customer Support for replacement.
7