Maintenance And Repairs - HIMO Z16 Manual Del Usuario

Maintenance and Repairs

Instructions for maintenance and cleaning
It is forbidden to rinse the electric bicycle with water, so as to avoid hidden dangers caused by the wet internal electronic compo-
nents and circuits;
Please use a cloth with neutral detergent to gently wipe the surface of painted or plastic parts, and then dry it with a dry cloth;
Please wipe the metal parts of the bicycle with lubricating oil for maintenance;
To prevent brake failures and dangers, it is strictly forbidden to inject oil into the brake.
Regular inspection for the electric bicycle
Inspect if the fasteners are tight and all the connectors are in normal connection;
Inspect the external tread pattern for abrasion and cracks, and check if the tires are in a proper pressure and the drive system
works normally;
Inspect if the brake system works properly.
Bicycle storage
When not in use for a long time, please don't store the electric bicycle outdoors with strong light or a temperature under zero, and mean-
while, please keep it in a distance of not less than 2 meters from heat sources (heating installation, etc.);
Please store it in a dry, clean and well-ventilated room with a temperature of 10℃~45℃ and a relative humidity of not greater than 90%;
When not in use for a long time, please charge it regularly (every two months usually) to maintain the performance of batteries;
Please protect the electric bicycle from contact with corrosive liquids and from mechanical shock and heavy load.