HIMO Z16 Manual Del Usuario página 35

Trouble Removal
QUESTIONS
No power after switching on
No power output of the
motor after switching on
Insufficient endurance
The battery fails to be
charged.
No display on the dashboard
Cause
The bicycle isn't powered
The bicycle is braking.
The bicycle is parked.
The speed is lower than 5km/h.
Failure of the starting switch.
The battery isn't fully charged.
Insufficient tire pressure.
Frequent braking and starting.
The battery is aged or faded normally in
capacity.
Low ambient temperature, causing the
battery faded in capacity.
The charger isn't plugged in properly.
Low battery temperature.
High battery temperature.
The bicycle isn't powered.
The dash isn't plugged in properly.
Solution
Check if the dash is plugged properly.
Low voltage of the battery. Charge the battery.
Check if the brake crank is braking.
Release the bicycle from "Park".
Pedal the bicycle to accomplish a speed of 5km/h.
Contact the after-sales service department.
Check the charger for damage.
Check the tire pressure before each use.
Develop a good driving habit.
Replace the battery.
Normal.
Check if the plug is loose.
Wait for the battery to be with a charging temperature.
Wait for the battery to be with a charging temperature.
Low voltage of the battery. Charge the battery.
Check the plug of the dash.