Hoshizaki ACK-40-A Manual De Instrucciones página 11

ENGLISH
6) Part No.6
7) Part No. 7
8) Wiring
Step 11
Tighten the spacer (No. 6) into the original louver fixing
screw hole (2 points on left and right).
Step 12
After refitting the removed louver, fix it with the thumbscrews
(No. 7).
* Dispose of the original louver fixing screws.
Step 13
Insert the connector (black) coming out from the tube pump
into the unit's main wiring connector (black), and use the tie
to bundle any excess wires.
8