Safety Markings - Sortimo 1000018967 Instrucciones De Uso

Safety markings

© Sortimo International GmbH
Material damage from missing or illegible safety markings
Dangerous situations cannot be avoided if safety labels are
illegible or are missing from the product.
▶ Make sure every day that all safety labels are visible and
legible on the product.
▶ Replace a safety marking if one is missing or illegible.
Secure load in the cargo area
This safety marking can be found in the vehicle's cargo area. It
contains instructions for securing cargo with ProSafe lashing
straps.
• If cargo is lashed to the side of the van racking, the cargo must
be in contact with the floor. In addition, the weight of the load
must not exceed 150 kg.
• The lashing points are resilient to maximum 200 daN.
• If cargo is lashed on the SoboPro, the distance between the
load and the lashing point may not exceed 15 cm.
• Only use designated lashing points (see limits of use).
• The lashing hooks of a lashing strap must be fastened to
lashing points of the same element.
Example: If the first lashing hook is attached to the floor, then
the second lashing hook must be attached to another lashing
point of the floor.
Restraint pole
This safety label is located at the bottom end of the restraint
pole. It contains instructions for the safe use of the restraint pole
and its load limits.
• Take into account the length of the restraint pole when using a
restraint pole.
• Do not exceed a load of 300 daN if the installation length of the
restraint pole is less than 1.8 m. Do not exceed a load of 200
daN if the installation length of the restraint pole is between
1.8 m and 2.2.m.
•
• Do not exceed a load of 400 daN if you are using more than one
restraint pole to secure the load.
GA 00035 | 2022-03-22 | 0
For your safety
23