Rules Of Use; Working With The Unit - STAMOS SWG-MWH-DS50 Manual De Instrucciones

a) Keep the work area tidy and well lit. Disorder or poor lighting can lead to accidents. Be foresighted, watch
what you are doing and use common sense when using the unit.
b) If you have any doubts as to whether the unit is working properly or if it is damaged, contact the
manufacturer's service department.
c) Keep these instructions for use for future reference. If the unit is to be passed on to a third party, the
operating instructions must also be handed over together with the unit.
d) Keep the packaging and small assembly parts out of the reach of children.
e) Keep the unit away from children and animals.
f) When using this unit together with other units, also follow the other instructions for use.
g) The unit is not a toy.
h) Keep the unit away from sources of fire and heat.
i) Do not overload the unit.
j) Lubricate the edges of the product regularly with anti-corrosion oil.
k) Do not use the product to lift other objects.
l) Remove the magnet before welding.
m) Do not expose the product to temperatures above 80
n) Keep the product away from precision or electronic instruments.
o) Be careful not to get your hands stuck between the parts during magnetic attraction.
CAUTION!
Although the product has been designed to be safe, with adequate safeguards, and
despite the additional safety features provided to the user, there is still a slight risk of
accident or injury when handling the unit. You are advised to use caution and common
sense when using this product.

3. Rules of use

The welding magnet with double toggle is used to hold workpieces while welding by maintaining the correct
angle.
The user is responsible for any damage resulting from misuse.

3.1. Working with the unit

1. Position the magnet between the parts to be welded.
2. Set the switch to the "|" (on) position.
3. Start the work:
Children should be watched to ensure that they do not play with the product.
o C. This will result in loss of attraction power.