Lotus SmarTime 50047 Manual De Usuario página 9

This product should not be worn when show-
ering or used in a sauna/steam room as it is
not possible to prevent steam entering the
watch. Any water damage to the product due
to non-compliance to this instruction will not
be covered by the warranty.
1. Functions
introduction
1.1 Buttons
Button A: Press to light up the display. From
a function, press to get back to Dial. From
Dial, press to turn off the display. Long press
to power on or off.
Button B: Rotate the button to switch the
DIAL. Double press the button to switch the
menu style.
Button C: Press to enter sports mode directly.
1.2 Charging Guide
Magnetic charging is as shown below. Sup-
ports PC USB or 5V charger. It takes about 2
hours to fully charged.
Please use the wireless charging pad in
the box or use the corresponding matching
wireless charging pad with "Lotus" +
"50047/50048" purchased from legal chan-
nels. Using unmatched wireless charging
pad may cause damage to the watch.
1.3 Shortcut functions:
1) From Dial, swipe from right to left to enter
Data. Swipe to left again to enter Heart rate
measuring. Swipe again to add more func-
tions.
2) Swipe down to for shortcut settings.
3) Swipe right for notification history and last
used functions.
4) Swipe up for Menu and when in Menu,
swipe again to see whole Menu
5) Long press on the Dial to enter change Dial
mode. Swipe to select and click to confirm.
1.4 Shortcut Setting menu
From Dial, swipe down to see Date, Bluetooth
connection status, Power and Time.
1) About, shows FW version and MAC
2) Settings
3) Brightness
4) Payment
2. Menu
2.1 Telephone
Tap Telephone icon to turn on/off the Blue-
tooth calling. To enable you need to pair the
Watch Audio Bluetooth displayed in watch.
When Bluetooth calling is enabled, you can
use the watch to answer/hang up the phone.
2.2 Messages
Connect to the Lotus SmarTime application.
You need to give the app the permissions to
show SMS, Calls or other notification of the
mobile phone first. Then the device can display
the same notifications as on mobile phone.
2.2.1. Incoming call notification:
Enable Incoming call in the app. The watch
lights up and vibrate when there are incoming
calls.
2.2.2. Messages notification:
Enable SMS in the app. The watch displays the
message and vibrate when there is an incom-
ing message.
2.2.3. Other APP notifications:
Enable APP notifications, all or selected. The
watch displays the message and vibrate when
there is an incoming message.
9 9