Assemble the spray gun
1.
Thread the lance into the spray gun.
Organize accessories
1.
Place the spray gun and lance assembly into
the holder on the dashboard.
2.
Push the nozzles into the rubber grommets
on the dashboard. Note: the dashboard label
indicates correct nozzle placement.
3.
Hang the high-pressure hose on the holder.
Attempting to start the engine incorrectly or using the pressure washer incorrectly can
result in engine and/or pressure washer damage, and may cause serious injury or death.
To avoid these hazards, be sure to read, understand, and follow the steps outlined in the
OPERATING CHECKLIST section of the owner's manual before starting the engine, and
follow all the guidelines for proper use of the pressure washer.
Page 7
3
OPERATING CHECKLIST
MS61220/MS61221- ENGLISH
2
1
REV 2 - 01/03/2022