Berner DM8 Instrucciones De Uso página 11

Battery life
(AAA alkaline batteries):
Ambient temperature:
storage temperature:
Auto Storage:
Weight:
Safety instructions
• Ensure that you have read and understood all the regulations and operating
instructions contained herein before using the device. Failure to follow these safety
principles and operating instructions may result in laser radiation, electric shock, or
personal injury.
• Do not attempt to modify the properties of the laser device in any way, as doing so
may expose you to the risk of laser radiation.
• Do not look directly into the laser beam of the device, this radiation is generated.
This is a class 2 laser product, only use the laser when it is switched on.
• Any operation, regulation, control, property setting, or any other program start of
the device, beyond the use described in this manual, can result in serious induced
damage caused by laser radiation.
• Operating this device together with other optical instruments may increase the
hazard to human eyes.
• The device has a built-in Class II laser generator for laser radiation with a
wavelength of 620 to 670 nm and output power max. ≤1mW. The laser beams on this
level will not cause optical damage. However, do not look directly into the laser beam,
this can lead to immediate blindness.
Error messages
Error code
err101
err154
err156
Note:
Declaration of conformity and confirmation of traceability:
We declare under our sole responsibility that the quality features of the product match those
in our sales documents (Operating instructions, brochure, catalogue) corresponds to the
standards and technical data specified.
We confirm that the test equipment used to test this product, secured by our quality
assurance system, can be traced back to national standards. Thank you for the confidence
you have shown in us by purchasing this product.
More than 5000 individual measurements
0~40°C
-20~65°C
50 records
100g (without batteries)
Error cause
Battery voltage too weak
out of reach
Signal is too weak
Solution
insert new batteries
please reduce the distance
Find a strong point of reflection
11