Operations And Settings; Basic Operations - JVC KV-DT2000 Manual De Instrucciones

Operations and Settings

Basic operations

Before operating the digital TV tuner, make
sure all the connections are correctly connected
and installed.
For watching TV programs:
1
Turn on the monitor and this unit.
• The program from the previous channel
(program position) will be shown if
a service list is available; otherwise,
"No Channel" will be shown.
2
Select the input on the monitor to
which this unit is connected.
3
5/∞
Press or PROGRAM +/– to
select your desired program.
• You can also select the program from
the CH (CHannel) List menu by pressing
ENTER (see page 9).
4
Press VOL +/– to adjust the volume.
TV icon
For listening to the radio:
1
Turn on the monitor and this unit.
2
Press TV/RADIO to go to radio
mode.
• If there is no radio program available,
"No Channel" will be shown.
3
5/∞
Press or PROGRAM +/– to
select your desired program.
• You can also select the program from
the CH (CHannel) List menu by pressing
ENTER (see page 9).
• A JVC logo screen appears.
4
Press VOL +/– to adjust the volume.
Radio icon
While watching TV programs/
Listening to the radio
Operations
To display the program
list sent by broadcast site
To change the audio
language
To display or exit from
Teletext (only for TV
programs)
To show your favourite
channels
• To register the channels, see
Category grouping on page
10.
To display the available
service list
To show the program
information
To select the sound
modes (AUTO,
STEREO, MONO,
Right-Both, Left-Both)
Press
7