Care And Maintenance; Warranty Disclaimer - Hama QI-FC10 Instrucciones De Uso

Note
• To be able to charge your device via the wireless charger, it must be compatible with induction charging
technology. Please refer to the operating instructions of your device for more information.
• Note that mobile phone cases, covers, etc., and other materials between the wireless charger and the
back of your device may interfere with or even prevent the charging process.
• Connect the enclosed USB-C cable to the USB-C input (1) of the inductive charger and a suitable USB
charger. When doing so, consult the operating instructions for the USB charger.
Note
• The maximum charging power of up to 10 W is only achieved with a Qualcomm quick charging device
(5 V / 2 A, 9 V / 1.67 A).
• An active power supply is con rmed by the status LED (2) brie y lighting up red.
Warning
Do not use defective chargers or USB ports and do not attempt to repair them.
• Place your device with its back on the inductive charger (B).
• The charging process begins as soon as an effective induction eld has been established. The status LED
(2) lights up solid red. The current charge status is displayed on your device.
• If no induction connection can be established, change the position of your device if necessary (B).
• The charging process ends automatically once your device's battery is fully charged. The status LED (2)
lights up solid blue.

5. Care and maintenance

Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners. Ensure that no
water is able to enter the product.
Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

6. Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the product or from failure to observe the operating instructions and/
or safety notes.
8