Indication To Clean The Aluminium Filters; Eco Boost; Standby; Brightness Adjustment - Fagor 3CFT-9060N Manual De Instrucciones

Indication to clean the aluminium filters

When the indicator is on, you need to clean the aluminium filters.
To acknowledge the indication, touch and hold T for approximately 2 seconds.
Note: Clean the filter indication will be displayed after approximately 110 hours of
fan operation.

Eco Boost

When operating at the highest speed, the appliance will eventually reduce the fan
speed down to 6. The time until fan speed is reduced depends on the initial fan
speed.

StandBy

The appliance will deactivate about 20 seconds after you turn off the fan and the
light. Some sensors will be dimmed or turned off. Touch any sensor to activate the
appliance.

Brightness adjustment

Use this function to adjust brightness. To adjust brightness, touch and hold the L
sensor for about 2 seconds. The lighting brightness will change
35