Charging The Battery - Ewbank NIFFTEE CDB800 Manual De Instrucciones

Before charging/first use Remove
and store the small transit plug in
the charging port.
The battery must be fully charged before the NIFFTEE is used for the
very first time.
a) Plug the battery charger into the charging port on the unit.
b) Plug the battery charger into the power supply. Charging time
needed is about 3 hours.
c) The charger light will turn green when the battery is fully
charged and ready for use
CAUTION – DO NOT USE THIS PRODUCT ON CARPET
• Place the scouring, buffing, or polishing pad onto the grips
located on the bottom of the rotating head, ensuring the pad is
central to the head.
• Push the on/off button to begin rotating head motion.
• To stop the head from rotating press the on/off button.
• The NIFFTEE is suitable to be used on may surfaces including
laminate, wood and vinyl plus worktops, mirrors, windows,
and ceramic tiles
• When cleaning / polishing keep the rotating head moving
across the surface at a gentle speed, allowing the NIFFTEE to
glide over dirty surfaces.

Charging the battery

Transit Plug
Using your NIFFTEE
7