5. Safety belts
To fasten the safety belts:
- hook the clasps of the shoulder straps to the corresponding buckles of the lap
straps; then connect the lap straps buckles to the main buckle (fig. 7).
To unfasten the safety belts:
- press the buttons of the main buckle and unfasten the belts; then unhook the
clasps of the shoulder straps from the lap straps buckles.
To adjust the tension of the belts, move the adjusting clasps forward or backward.
WARNING: To ensure the safety of the child:
1.
The position of the lap straps should be properly adjusted to the height
of the child. The straps should be close to the child's body, but they still
should not hinder their movements.
2.
The lap strap should be adjusted in a way so that it runs at the lower part
of child's hips.
3.
While locking the lap straps buckles in the main buckle you will hear a click
sound.
4.
If the safety harness is damaged, it must be repaired immediately. Any
repairs can be performed by authorized service centre only.
6. Backrest
The backrest can be adjusted to 3 different positions (please, see the pictures
on the left). To change the angle of the backrest, press the backrest adjustment
button (behind the backrest) and choose one of the three available backrest
angles (fig. 8).
7. Height adjustment
To adjust the seat level, press both height adjustment buttons simultaneously
(please, see the above picture) and set a desirable seat level (fig. 9).
WARNING: Do not adjust the height of the chair if there is a child sitting on it.
8. Folding
Press and move the buttons on both sides of the bottom of the tray (please, see
the above picture) and slide it off the guides.
EN
‑ 6 ‑