Vox Mode; Cry Alert - Lionelo care Babyline 8.2 Manual De Usuario

2.
The camera allows you to play five lullabies (fig. 9). Select the lullaby you
want to play and press OK. To stop playing, press OK again.
3.
Select icon to play all lullabies one after another.
4.
In the lullaby selection interface (fig. 9) you can use left/right keys (
to change the lullaby, and up/down keys (
5.
You can enter the lullaby selection interface also by pressing the music
playing key

VOX mode

1.
VOX mode, a default mode in the device, allows you to save a battery.
2.
If the child is sleeping and the device cannot detect any sound in 30
seconds, the display unit will switch into the standby mode, and the image
broadcast will be terminated. When the device can detect the sound,
the image broadcast will be resumed. No sound alarm.
3.
When VOX mode is inactive, the image broadcast can be activated and
deactivated manually through a switch. When the image broadcast is
inactive, the display unit serves only to transmit sounds. No sound alarm.
4.
Cry alert function is available when VOX mode is active (fig. 12).

Cry alert

1.
The device can activate the alarm on the display unit and sound signal
in case your child starts crying.
2.
In the menu, select
3.
Select one of three cry sensititivty levels.
Low , medium
4.
Select „ON" and next press OK (fig. 10).
5.
When the device can detect the child crying, the image broadcast will
be resumed and the flashing icon will pop up in the screen, sound alarm
will also be activatred.
EN
(13, fig. C).
icon and press OK.
, or high
‑ 12 ‑
), to change the volume.
.
)