Lionelo care Babyline 8.2 Manual De Usuario página 13

How to set the date and time
1.
In the menu, select
2.
Select
time and then press OK (fig. 11).
3.
OSD (on screen display): decide if the date and time are to be showed
on the display screen (ON/OFF, fig. 11).
How to set the language
1.
In the menu, select
2.
Select
and then press OK.
How to set alarms
1.
In the menu, select
2.
Select
sound alarm (fig. 12).
3.
If the sound alarm is inactive, the temperature/feeding alarm will be
displayed only on the screen, with no sound signal.
Temperature alarm
1.
The device can sound the alarm on the display unit when the temperature
in the child's room is too low or too high.
2.
In alarm settings, select the temperature alarm (fig. 13).
3.
Choose the temperature unit (Celsius or Fahrenheit degrees) and press
OK.
Baby feeding reminder
1.
The device can sound the alarm on the display unit in order to remind
you about the scheduled baby feeding.
icon and press OK.
icon and press OK to set the date and time. Set the date and
icon and press OK.
icon and press OK to set the language. Select the language
icon and press OK.
icon and press OK to set alarms. Activate or deactivate the
‑ 13 ‑ EN