Saurium F003 Manual Del Usuario página 26

OPERATING INSTRUCTIONS
1. HOW TO REMOVE THE CHAIN
Press the compression button and remove the side cover. Then remove the side cover as in
the illustration and remove the blade directly.
2. HOW TO FIT THE CHAIN TO THE GUIDE BAR
Place the chain on the bar guide, the middle tooth fits into the groove in the bar guide.
NOTE: the bar of the chain should be at the front.
NOTE: The battery-powered saw has a device for adjusting the chain voltage.
When installing the guide blade, check that the adjustment block fits into the position
adjustment hole at the end of the guide blade.
• Insert the chain into the bar guide.