Operation
Adjustment of the Reclining Position
Function
Key
Raising Func-
tion
Lowering
Function
Lifting the
Foot Rest
Lowering the
Foot Rest
Zero G Func-
tion
Setting the Timer
Function
Key
Time Setting
Timing
Ending the Current Massage
As soon as you want to end the current massage, press the on/off key on the remote control. Now all massage
functions will stop automatically, the back rest will lift up to its maximum position and the foot rest will lower to its
maximum position. If the time of the current massage has expired, all massage functions will also stop. Howev-
er, the position of the back rest and foot rest will remain unchanged. To move them back into their home position
(back rest up/foot rest down), press the on/off key on the remote control.
Description
If you press and hold this key the back rest will simultaneously come up and the leg rest
will go down.
A signal will sound when the maximum upwards position for the back rest and down-
wards position for the foot rest have been reached and both will stop there.
To stop the movement in any particular position, press the key again.
If you press and hold this key the back rest will simultaneously go down and the foot rest
will come up.
A signal will sound when the maximum upwards position for the foot rest and the down-
wards position of the back rest have been reached and both will stop there.
To stop the movement in any particular position, press the key again.
Press and hold this key and the foot rest will come up.
A signal will sound when the maximum upwards position for the foot rest has been
reached and it will stop there.
Press the key again to stop the foot rest in any particular position.
Press and hold this key and the foot rest will go down.
A signal will sound when the maximum downwards position for the foot rest has been
reached and it will stop there.
Press the key again to stop the foot rest in any particular position.
Press this key to select one of the three pre-set reclining positions
Description
Press this key to adjust the massage time
in 5 minute increments to a maximum of
30 minutes
min
14
Note
If you go above 30 mins, the display
will reset to 5 minutes