Assembly - Maxxus MX 10.0z Instrucciones De Instalación Y Funcionamiento

Floor Protection
As the massage chair is very heavy, it is recommended to lay down some floor protection particularly for floors
such as parquet, laminate etc which could easily become damaged. You could use a rug or piece of carpet for
this or alternatively a MAXXUS floor protection mat.
Assembling the Foot Rest
Step 1 - Fig 1:
Connect the air hose and the wiring harness between the foot rest and the base frame. Push the extra cable
back into the frame.
Step 2 - Fig 2:
Insert the fixing elements to the right and left cross tube on the foot rest.
1
Step 3 – Fig 3:
Insert the fixing elements assembled in Step 2 into the mounting hooks on the massage chair.
Step 4 – Fig 4
Fix each fixing element with 2 M4 screws. Make sure that you do not crush or damage either the air hose or the
wiring harness when you do this.
3
2
4
17
Operation

Assembly

ENG