UFESA TotalChef RK5 Manual De Instrucciones página 33

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
EN
to speed 04, even through the current working speed is set
at speed 05-10.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact
an official technical support service. In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s Official technical support service may carry out repairs or
procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.
INSTALLATION
The bowl
The Maximum capacity of the bowl is 2 liters. Don't process the food more than 2 liters!
Caution:
"Hot surface" logo marked on the bowl:
To indicate that the marked item can be hot and should not be touched without taking care!
How to install the Airproof ring: (E)
See figure E
How to install the blade: (F)
1. Put the airproof ring on the blade. Push the blade through the opening in the bottom of the bowl.
2. Hold the upper part of the blade with one hand, and put the spanner with the other hand. And then
insert the spanner on the bottom of the blade. Rotate the spanner clockwise to assemble tightly on the
bowl.
Caution:
1. The blade is very sharp! Please handle it with care!
2. Only hold the upper part of the blade!
3. The airproof ring must to be fitted on the blade! If there is no airproof ring, the food to be chopped or
cooked may leak out and damage the appliance.
How to remove the blade: (G)
Rotate the spanner anti-clockwise to remove the blade.
Caution:
1. The blade is very sharp! Please handle it with care!
2. Only hold the upper part of the blade!
How to install the bowl: (I)
1. Put the bowl lid on the bowl. And rotate the bowl lid clockwise to lock it on the bowl. Sound "click" will
be heard at this time, which means lid is correctly installed.
2. Insert the bowl onto the bowl socket. Be sure to make place Z1 point to place Z2. Sound "click" also
will be heard at this time, which means the bowl is well in position.
3. Insert the measuring cup on the bowl lid. (See above figure)
33

Publicidad

Tabla de contenido
loading

Tabla de contenido