Unit Set Up - Bell TotalFit Manual De Instrucciones

All manuals and user guides at all-guides.com
gETTINg STaRTED: UNIT SET UP
Before starting to use the product, the following information has to be input. Once entered, the
computer will NOT ask again for this information.
Note: To correct or modify your selection at any time, push the MAJOR FUNCTION reset button at the
back of the computer (see page 23).
MIlE/ hOUR OR kIlOMETER/hOUR SElECTION
After installing the battery, the Speed Unit selection screen will appear. Press the UPPER RIGHT button
to choose between M/h or KM/h. Press the UPPER LEFT button to confirm choice.
WEIghT aND STRIDE lENgTh UNIT SElECTION
After the M/h or KM/h selection, the Weight and Stride Length Unit screen will appear. Press the UPPER
RIGHT button to choose between "LB IN" (Pounds and Inches) or "KG CM" (Kilos and Centimeters).
Press the UPPER LEFT button to confirm choice.
WEIghT INPUT
Now that the weight unit has been selected, the computer will ask the user to enter his/her weight. This
will allow the computer to estimate the number of Calories Burned while walking, running or cycling.To
enter the correct weight, press the UPPER RIGHT button until the correct right most digit appears. Press
the UPPER LEFT button to lock in the correct digit. Repeat until all digits are entered.
12 or 24 hR FORMaT SElECTION
After the weight input, the clock format screen will appear. Press the UPPER RIGHT button to choose
between 12hr or 24hr format. Press the UPPER LEFT button to confirm choice.
12