Insert, Unlock And Remove The Battery; Battery Charge - Youin Paris Manual De Usuario

Operation
choosing the set value,
(1) Short press CUR to save the current value, and the parameter flicker will stop.
(2) Press S+ + S- to exit settings and save parameters. If it is not pressed, it will
automatically exit and save the parameters after 8 seconds.
10. Power-on password modification settings
Long press S+ + S- to enter setup menu interface, in this interface, long press CUR
to enter the password setting interface. Short press S+ and S- to add or reduce
the password value, and short press to switch the position. After entering the
password, long press CUR again to exit the password settings interface to the menu
setup interface(at the same time the modified password has been saved). long press
S+ + S- again to exit the menu interface, if not, it will exit automatically after waiting
for 8 seconds.
Note: The next time when starting up, you need to enter the revised password.
Note: Because of the upgrade of the company's products, maybe part of the display
contents of the products you have got is different from the instructions, but it will not
affect your normal use.

Insert, unlock and remove the battery

1- Insert the key into the keyhole.
2- Turn the key switch to ON position when you use the
electric bike.
3- Turn the key switch to OFF position when you stop
using the electric bike.
4- Press and turn the key switch to UNLOCK to unlock
the battery for removal.

Battery charge

When you finish the trip or the battery is running low,
charge it immediately.
Charging methods can be divided into two types: one
is to take out the battery and then charge it, the other
is to charge the battery directly on the electric bicycle.
Connect the charger plug to the battery charging port
and to the power. Connect it to a 220V / 50-60Hz power
supply.
There is an LED indicator on the power supply. The
LED is red when the battery is charging. The LED turns
green when the battery is fully charged.
Recommended charging time: 4-6 hours.
After charging, please unplug the input plug (from the wall outlet) first, and then
unplug the output plug (from the bike). The battery charger must have constant
8
YOU-RIDE PARIS