First Steps; Functions; Pairing An Energiser - VOSS.farming 41404 Instrucciones De Operación

+
Battery
compartment
6

FIRST STEPS

1.
Remove the screw and the cover of the battery
compartment on the back of the remote control.
2.
Insert the supplied battery (CR2 battery, 1 pc.) according to
the polarity.
WARNING
»
Pay attention to the correct polarity of the
batteries
and possible damage to persons or the device.
»
Small parts that can be swallowed. Keep away from
children when changing the batteries.
3.
Put the battery cover back on the battery compartment and
screw previously removed screw back in. Tighten the screw
hand-tight.
4.
To switch on the remote control, press the
I nfo
When you switch on the remote control and no energiser is
paired, various symbols light up on the left side of the display.
7

FUNCTIONS

7.1

PAIRING AN ENERGISER

One remote control can manage up to six different energisers.
Likewise, one energiser can be connected to and controlled by
three different remote controls.
1.
Switch the energiser to pairing mode:
16
INSTRUCTION MANUAL VOSS.FARMING REMOTE CONTROL
No
-
15
16
17
to avoid battery leakage or explosion
Name
On/off switch remote control/
go back a step
Change the display of the
measured values
On and off switch of the
energiser
41404 - 06.2022 - V1
button (15).