Maintenance Activities; Wheels; Deck, Brake & Steering Mechanism; Handlebar - BERG Nexo Manual De Usuario

EN

3.2 Maintenance activities

Clean the toys scooter with a damp, soft cloth every time when you have finished using it. Never use
abrasive or solvend-based cleaning solutions to clean the product. Store the product preferably in a dry
and dust-free space.

3.2.1 Wheels

The PU wheels wear down with time and can be damaged if used frequently on rough surfaces. The
rear wheel on which the brake is applied is particularly affected after several hours of braking. Replace
if necessary. Damaged wheels or rims can lead to accidents! The wheels must not come into contact
with oil, grease or fuel.
The wheels might not rotate smoothly anymore when the bearings are affected by sand, water or
filthiness. Clean the bearings or replace them if necessary.
3.2.2 Deck, brake & steering mechanism
Check if the parts of the steering mechanism still rotate smoothly. Sand, water of filthiness might
affect good functioning. For cleaning, use warm water or a damp cloth. Especially the area marked by
arrow, see image. Check if all nuts and bolts are still tight and in a good condition. Tighten or replace
if necessary.
The screws can become loose or worn out after a long period of use. Check if all screws are still tight
and in a good condition. Tighten or replace if necessary.
The brake should only be touching the rear wheel when applying pressure to it. Make sure it bends back
after each time you brake. Replace if necessary.

3.2.3 Handlebar

The handlebar and the deck should always be tightly connected. Check this by leaning left and right. Any
play between these parts makes it more difficult to steer properly.
Check if all three height positions can be securely locked. The handlebar will get wobbly if the clamp
doesn't function properly.
The bolts can become loose or worn out after a long period of use. Check if all bolts are still tight and
in a good condition. Tighten or replace if necessary.
13