Submenu: Lock / Pin - Eaton Ex ResistTel Instructivo De Servicio

Submenu – Lock / PIN (except ZB version)
When you call up the menu "Lock / PIN", you are prompted to enter the
PIN. The PIN consists of 4 digits. In the state when delivered, the PIN is
"0 0 0 0".
If you change the PIN, don´t forget the new PIN. Forgetting the PIN
is the equivalent of losing a key. If you forget the PIN, please
contact our technical support.
Technical support in Germany, located in Mülheim an der Ruhr:
Telephone 0208 82 68 256
Fax 0208 82 68 377
e-mail fhf-support@eaton.com
From outside of Germany, please prefix the country code:
Telephone +49 208 82 68 256
Fax +49 208 82 68 377
When you have entered the PIN, you can make selections under the
following items with the aid of the key
• Direct Call
• Total Lock
• Directory Only
• Settings
• Change PIN
When you have selected an item, you can activate it by pressing the
key . You can exit the menu using the key
Note:
When the settings are disabled the main menu items "Settings",
"Languages" and "Change Phonebook" are only accessible after
entering the PIN.
The menu item "Default Settings" resets all settings except, however,
the PIN you may have changed and the language.
24
To switch on the direct call
To enter the direct call number
Locks the telephone preventing all outgoing calls
Caution: It is also not possible to dial emergency
telephone numbers
Only permits outgoing calls to numbers contained
in telephone book
For disabling or enabling the main menu items
"Settings", "Languages" and "Change Phonebook"
To change the PIN
or :
.