Technical Data - Eaton Ex ResistTel Instructivo De Servicio

Technical data

Warning!
In order to maintain the explosion protection it is of paramount
importance to observe the information given in the chapter "Explosion
protection – characteristic data" on pages 13 and 14.
Note:
Except for ZB version for items marked with an asterisk *).
Connection data
Supply voltage
Supply current
Ringer voltage
Ringer impedance
Consultation hold
key *)
Dialling method *)
Exchange number*) An exchange number and dialling pause are
Bell-Shunt
Headset *)
Second earpiece
Connection
terminals
Housing
Material
Height x width x
depth
Weight
Display *)
28
24 V to 66 V
DC DC
15 mA to 100 mA
DC
24 V to 90 V
AC AC
30 V to 90 V
AC AC
Greater than 6.0 kΩ at 25 Hz and 24...90 V
Greater than 4.0 kΩ at 50 Hz and 24...90 V
Flash function adjustable from 40 ms to 399 ms
via the menu.
PD or DTMF mode can be set via the menu.
DTMF mode in accordance with ITU-T
recommendation Q.23.
Pulse Dial mode with pulse pause ratio 1.5:1 or
2:1 (adjustable via the menu).
programmable to between 1 s and 6 s via the
menu.
Possibility for connecting a second external ringer.
Terminals for the connection of a headset
(optional accessory).
Note: A headset or a second earpiece can be
connected, but not both simultaneously !
Terminals for the connection of a second earpiece
(optional accessory).
Note: A headset or a second earpiece can be
connected, but not both simultaneously !
2
Up to 4 mm inflexible.
2
Up to 2.5 mm flexible.
Glass-fibre-reinforced polyester
approx. 260 mm x 228 mm x 135 mm
approx. 5.5 kg
2-line alphanumeric display with pictograms.
Field of view approx. 78 mm x 26 mm.
DC
(calling frequency 21...54 Hz)
(calling frequency 16.6...54 Hz)
AC.
AC.