Set-Up And Use - Andis BD Instrucciones De Uso Y Cuidado

Drawstring
Hose Locking Ring
Bonnet Storage
Compartment
Temperature Setting
OPERATING INSTRUCTIONS
This appliance has a polarized plug (one blade is wider than the other). As a safety
feature, the plug will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still doesn't fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
IONIC TECHNOLOGY
The ionic technology is activated when the dryer is in use. Ionic technology breaks
up water molecules, which results in quicker drying time and helps make your hair
softer and shinier.

SET-UP AND USE

NOTE: Stop the dryer and take the bonnet off immediately if you feel any
discomfort. Drying times will vary with different hair types.
1. Place the dryer on a level, heat-resistant table or countertop.
2. Open the lid and gently remove the power cord, hose and bonnet.
3. Connect the power cord to outlet.
4. Attach the hose to the bonnet by snapping the tabs on the hose locking ring into
the locking ring on the bonnet.
5. Towel-pat and untangle wet hair to remove excess water and to shorten drying time.
4
Hose
Elastic Bonnet
Air Intake Grill
Fan Setting