User Maintenance - Andis BD Instrucciones De Uso Y Cuidado

6. While the dryer is OFF, place the bonnet over hair and pull drawstring to tighten if
necessary. The bonnet should not cover sensitive areas such as the ears and parts
of the neck.
7. Turn the dryer ON by choosing either the HIGH or LOW fan setting. The HIGH fan
setting is best for very wet hair; the LOW fan setting is for more gentle drying or
touch-ups.
8. Select the HOT temperature setting.
9. For best curl results, select the WARM setting for a few minutes at the end of
drying time to "set" the curls.
10. After use, take the bonnet off and unlock it from the hose. Let dryer, bonnet and
hose cool down until they are no longer warm to the touch. Then fold the bonnet
and store it in its compartment in the dryer case. Gently loop the power cord and
store it in the case as well. DO NOT wrap the power cord around the dryer.
11. You can stand the dryer up on its side when not in use for easy storage.

USER MAINTENANCE

This appliance does not require special maintenance or lubrication. If any
malfunction occurs, DO NOT attempt to repair it yourself; contact an Andis authorized
service station. To contact Andis directly, please call our Customer Support
Team at 1-800-558-9441 or email us at support@andisco.com.
Untwist cord before use. After use, re-wrap cord and store unit in a safe place.
Do not wrap cord around appliance. Do not hang the unit by the power cord.
AIR INTAKE GRILL
Periodically check the air intake grill for lint build-up and clean with a small brush or
vacuum if necessary.
CLEANING
• The dryer must be unplugged before it is cleaned.
• To clean the dryer or bonnet, clean the external surfaces with a sponge or soft rag
moistened with a mild soap and water solution. DO NOT immerse in water or any
liquid.
• Do not use harsh cleaners, abrasives, detergents, or solvents.
• Dry the dryer and bonnet thoroughly before use.
5