Image / Data Output - BRAUN Photo Technik Black400 WiFi 4K Manual De Instrucciones

Ocultar thumbs Ver también para Black400 WiFi 4K:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

continues to move to the main sensor detection area, the
camera will take photos or record video automatically, If the
animal leaves the area detected by the main sensor, the camera
will turn off and return to standby mode.
3. Night mode
At night, the infrared LED light will turn on automatically to
provide necessary lighting for taking photos. The LED light
illuminates with a range of about 3-22 meters. If the animals are
too close to the camera, it may cause overexposure.
In night mode, the picture or video is only black and white. When
recording video for a long time, low voltage may have a big
effect on the stability of the camera, so DO NOT record video at
night when the power is low.
Note: If the camera is used at night when the battery voltage is
low, the current increases due to the infrared light. Low battery
may have a big effect on the stability of the camera. The camera
cannot take photos / video or take very dark images, but it does
not affect the daytime photo or video.

8. Image / Data Output

Connect to your computer to download photos/videos
After the camera is connected to the computer and enters the
removable disk mode, a removable disk will be added in the "My
Computer" window. Taken photos or videos will be stored in the
"DCIM"
directory on the removable disk. You can enter this
directory to copy files to your computer hard disk.
Note: To avoid data loss, do not disconnect the data cable
during file downloading, and do not plug or unplug the memory
card when connected.
-17-

Publicidad

Tabla de contenido
loading

Tabla de contenido