Steren STV-040 Manual De Instrucciones página 2

25" to 50" TV STAND
Before to use the product, please read carefully this manual to avoid any malfunction
The info in this manual is shown as reference. Consult our website www.steren.com to obtain the
current version of this manual.
User Manual
MOUNTING INTO WOOD
Use the level and the stand like a template to make the drill marks over the surface where you
want to install the stand.
D
Mark Drill
Right position
CONTENT
Stand
SCREW, NUT AND ANCHOR KIT
x4 x4
(C) (G) (A)
2" Screw Anchor M8*30 mm screw
x4 x4
(H) (B)
Bushing M8*18 Nut M8 Nut M6
TOOLS MAY YOU NEED (NOT INCLUDED)
V0.0/1018v
Install in the screew
Place the barrs in the rear, choose 4 screws, nuts and bushing to fix it.
C
MOUNTING INTO CONCRETE
Use the level and the stand like a template to make the drill marks over the surface where you want to
install the stand.
Barrs
x4 x4
Mark Drill
(E)
M6*30 mm screw
x4
(D) Level
To make the drills, ensure there is not water pipes, electric wires and pipes gas.
MOUNTING INTO THE STAND
Install the screen into the stand
A or E
F
B
Fix the barrs tighten the
H
security screw.
Install in the screew
Place the barrs in the rear, choose 4 screws, nuts and bushing to fix it.
G
D
C
Right position
CAUTIONS
• Choose a flat and solid wall to can fix the stand.
• Don't tighten excessively the screws.
• For indoor use.
• Evita las caídas del equipo, ya que podría sufrir daños.
• For the install into wood, ensure that this be rigid.
Adjust the vision angle and
tighten the secures again.
• This device is not designed for be using by people (including children) with physical
capacities, sensorial or mental reduced, or they don't have the necessary experience or
knowledge.
• Los niños deben supervisarse para asegurar que no empleen el aparato como juguete.
A or E
B
H
Do not exceed the maximum charge capacity.