HIKOKI RH 18DA Instrucciones De Manejo página 9

SPECIFICATIONS
1. Power tool
Model
Voltage
set I
Temperature/
air volume
set II
Battery available for
this tool*
1
Weight*
2
*1 Existing batteries (BSL3660/3620/3626, etc.) cannot be
used with this tool.
When using 14.4 V (BSL14xx series), the air volume/
temperature and remaining battery indicator do not
perform the specifi ed functions.
*2 According to EPTA-Procedure 01/2014
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
2. Battery (sold separately)
Model
Voltage
Battery capacity
Available cordless
products*
Available charger
* Please see our general catalogue for details.
Before
charging
While charging Lights
Charging
Pilot
complete
lamp
(red)
Charging
impossible
Overheat
standby
RH18DA
18 V
30 - 400°C / 200 L /min
30 - 550°C / 300 L /min
Multi volt battery, BSL18 Series
1.0 kg (BSL1830C)
1.3 kg (BSL36A18)
1.6 kg (BSL36B18)
BSL1830C
18 V
3.0 Ah
18 V product
Sliding charger for lithium ion
batteries
Indications of the pilot lamp
Lights for 0.5 seconds. Does not light for 0.5
Blinks seconds. (off for 0.5 seconds)
Lights continuously
Lights for 0.5 seconds. Does not light for 0.5
Blinks seconds. (off for 0.5 seconds)
Lights for 0.1 seconds. Does not light for 0.1
Flickers seconds. (off for 0.1 seconds)
Lights for 1 second. Does not light for 0.5
Blinks seconds. (off for 0.5 seconds)
3. Charger (sold separately)
Model
Charging voltage
Weight
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1- second intervals).
CAUTION
Do not use the electrical cord if damaged. Have it
repaired immediately.
2. Insert the battery into the charger.
Firmly insert the battery into the charger.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot lamp
will blink in red. (At 1-second intervals) (See Table 1)
● Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
Table 1
9
English
UC18YFSL
14.4 V–18 V
0.5 kg
Malfunction in the
battery or the charger
Battery overheated.
Unable to charge.
(Charging will
commence when
battery cools)