Power On/Off; Video Recording - Wiseup C4000 Guia Del Usuario

All manuals and user guides at all-guides.com
-1× Remote Controller
-1× USB Cable
-1× AC110-240V to DC 5V Power Adapter
-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Operation
>> Before using, please make sure your clock camera is fully charged.
>> Remove the insulating film both from the end of the backup battery and the remote controller.
>> Remember to point the remote controller towards the LCD of the clock every time you
press a button.
>> Please make sure the Micro SD card has been formatted already and is securely fitted
into the camera's SD card slot, or it will not work. We recommend you use a SDHC Class
10 Micro SD card.
[Note]:
If no Micro SD card is fitted into the camera, the camera will shut down automatically.
The blue indicator light will start flashing for a minute and then turn off.

3.1. POWER ON/OFF

3.1.1. Slide the Power Switch to the ON position and press and hold the Power Button for
1 second to power on the camera. The blue indicator light will come on and stay
illuminated, indicating the camera has entered into standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 1 second again and then
slide the Power Switch to the OFF position. The blue indicator light will turn off.
[Note]:
1). The camera will shut down automatically if it is in standby mode without any operation more
than 1 minute.
2). If the camera is in low battery, the blue indicator light will be illuminated for 5 seconds, then
flash 4 times fast and turn off. The camera will shut down automatically.

3.2. VIDEO RECORDING

3.2.1. Slide the Power Switch to the ON position and press and hold the Power Button for
1 second to power on the camera. The blue indicator light will come on and stay
illuminated, indicating the camera has entered into standby mode automatically.