Power On/Off; Video Recording - Wiseup W8100 Guia Del Usuario

All manuals and user guides at all-guides.com
-1 × USB Cable
-1 × AC110-230V to DC 5V Power Adapter
-1 × 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Operation
>> Before using, please make sure your camera is fully charged.
>> Please make sure the Micro SD card has been formatted already and is securely fitted
into the camera's SD card slot, or it will not work. We recommend you use a SDHC Class
10 Micro SD card.
[Note]:
If no Micro SD card is fitted into the camera, both blue and green indicator lights will be
illuminated for 4 seconds, then the green one will turn off and the blue one will flash for 3 seconds and
turn off. After that, the green one will come on and flash 3 times then turn off. The camera will shut
down automatically.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and
green indicator lights will be illuminated for 3 seconds and then the green one will turn off
while the blue one will stay illuminated, indicating the camera has entered into standby
mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds again in standby
mode. The green indicator light will flash 3 times and turn off with the blue one.
[Note]:
1). If the camera is running low on batteries, the green indicator light will slowly flash for 30 seconds
and turn off. Then the camera will shut down automatically.
2). The camera will shut down automatically if it is in standby mode without any operation more than
3 minutes.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. Both blue and
green indicator lights will be illuminated for 3 seconds and then the green one will turn off
while the blue one will stay illuminated, indicating the camera has entered into standby
mode automatically.