Troubleshooting - Greenlee 2562 Manual De Instrucciones

Troubleshooting (Battery)
PROBLEM
No LEDS light up.
Charge Indicator disagrees
with charger.
Battery feels warm.
Battery feels hot!
Tool runs slow.
Battery does not hold a charge.
Greenlee Textron / Subsidiary of Textron Inc.
All manuals and user guides at all-guides.com
Battery Charger
PROBABLE CAUSE
Battery is fully discharged.
Battery is damaged.
Charger has not completed the
last 20% of charge.
Battery has been topped-off too
many times without a full discharge.
Battery has been damaged.
Normal usage or charging.
Battery was shorted.
Battery was very heavily used.
Crimper is out of calibration.
Crimper and battery are cold.
Battery is low.
Battery is worn out.
Battery is damaged.
Battery has not been used for several
days. (All batteries self-discharge.)
Battery is worn out.
Battery is damaged.
Charge battery.
Replace battery.
Leave in the charger.
Place into the charger and press
the recondition button on the charger.
Replace battery.
No action required.
Allow to cool and retry.
Allow to cool.
Send tool to authorized Greenlee
service center for calibration.
Allow unit to warm.
Charge battery.
Replace battery.
Replace battery.
Charge battery.
Replace battery.
Replace battery.
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
15
POSSIBLE REMEDY