Uponor I-35 Manual De Instrucciones página 4

All manuals and user guides at all-guides.com
2. Setting to current time and day
Before beginning the programming of the device, please slide cover down and
press {RESET} with the tip of a pen.
You are putting the device into operation for the first time. You have just pressed the
RESET button (see above).
1. | |Select the year using *1 buttons|.
OK
2. | |Confirm with *1|.
3. | |Select the month using *1 buttons|.
OK
4. | |Confirm with *1|.
5. | |Select the day using *1 buttons|
(A pointer will indicate the corresponding day of the week).
OK
6. | |Confirm with *1|.
7. | |Select time using *1 buttons|.
OK
8. | |Confirm with *1|.
After time setting confirmation, the programmer switches into automatic mode.
9. | MODE |If you wish to change the time or the day, press *1 button until the pointer
appears under the clock symbol and proceed as above|.
3. Programming
|4|You can programme your week according to *1 programme settings|:
|P1,P2,P3|*1, *2, *3 are pre-recorded and cannot be modified|.
|P4|*1 is blank and allows you to create a personalized programme varying according to
the day of the week for each zone|.
|P2,7|The standard allocation of *1 is to *2 days of the week|. If this corresponds to your
life style, stay in automatic mode. Otherwise, continue.
P4 = |30|Blank programme allowing you to create periods of Comfort and ECO (*1 min.
minimum) for each day of the week and each zone|.
| |In automatic mode, select the zone you wish to program with buttons *1|. The
selected zone is indicated: |Z2|(example *1)|.
To program your week according to pre-registered programs.
| |In automatic mode, select the zone you wish to program with buttons *1|.
The selected zone is indicated: |Z1|(example *1)|.
| |To switch to programming mode, press button *1 until the pointer appears under
MODE
Prog|. The display indicates the zone you are programming and the program number.
| |Press button *1 until a pointer appears under the day you wish to programme|.
1-7
PROG
| |Press button *1 to select your program|.
P1-P4
OK
| |Press button *1 to validate|. The following day is automatically proposed.
2 2|I-35|Timer *1|