Uponor I-35 Manual De Instrucciones página 6

All manuals and user guides at all-guides.com
2. | ,1|A short press on the "ECO" button *1 will switch zone *2 temperature level
from comfort to ECO|. |Z1|The *1 display will start to blink|.
| , |This modification will end at the next program step or by pressing *1 or *2|.
7. Permanent override
This function allows permanent modification of set-point.
Example: |2|zone *1 is in ECO mode and you want to switch it permanently to comfort|.
1. |2, |Select zone *1 with buttons *2|. The selected zone is indicated.
2. | ,2|A long press on comfort button *1 will permanently switch zone *2 temperature
level from ECO to comfort|.
|Z2|The display indicates *1 and a "hand" symbol|.
| , |This modification will end after a short press on button *1 or *2|.
Note: | , |when a zone is in comfort mode, it is possible to make a permanent
override into comfort mode by pressing on button *1 (same procedure for ECO mode with
button *2)|.
8. Switch OFF the installation
| |A pressure on button *1 will switch off the installation|. The timer will display time and day of
the week. When the timer is switched off, permanent and temporary overrides are cancelled.
| |To switch to automatic mode, press *1|
9. PROLONGED ABSENCE MODE (HOLIDAYS)
|1,99|This mode protects your dwelling from freezing by applying the frost protection
mode on the two zones during your absences {(from *1 to *2 days)}|. You can
programme the length of your absence so that the temperature rises for your return.
|2|*1 possibilities to apply the frost protection mode|.
1. Permanent frost protection mode.
| |Press on button *1|.
|1|Day *1 blinks|.
-
| |Press on button *1|.
The display indicates Forc.
OK
| |Confirm with *1|.
2. Frost protection mode for a number of days.
| |Press on button *1|.
|1|Day *1 blinks|.
|1,99|Set the length of your absences in days (from *1 to *2), the current day counts as one|.
The pointer indicates the day of your return.
The timer switch automatically to Auto at the end of the programmed period.
.
OK
| |Confirm with *1|
| |To stop frost protection mode and switch manually to automatic mode, press *1|
MODE
10. POSSIBLE SETTINGS
The following setting can be made on the back of the device (when it is not mounted).
=
automatic change summer / winter time activated
ON
1
automatic change summer / winter time not activated
OFF
=
4
.
4|I-35|Timer *1|
.
.
.