Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
|2,
|Press *1 times on button *2 to return to automatic mode|.
MODE
|P4|To create a *1 program|
|24,48|A *1-hour profile composed of *2 "thermometers" at the bottom of the display
panel allows your programme composition to be easily viewed|.
|3|Example - programming *1 temperature periods for Friday|:
|6,8,2,6,10|*1 a.m. till *2 a.m., noon till *3 p.m. and *4 p.m. till *5 p.m.|
PROG
|
P1-P4
,P4|Press button *1 until the *2 programme number flashes in the right side of the
.
screen|
|24|Your display panel indicates time as 00:00 and the first thermometer
flashes on the *1-hour profile|
|
|Press button *1 several times to obtain a period of ECO mode|.
|
|Press button *1 several times to obtain a period of comfort mode|. |30|The time
displayed advances by *1 minutes for each short press|. Repeat this action as many time
as you wish to obtain the period of ECO or comfort mode.
Note:
|11:30,12:00,
,
,
|If you make a mistake (e.g. *1 instead of *2) use *3 buttons
to advance or return and correct with *4 or *5|.
OK
|
|Press button *1 to validate|. The following day is automatically proposed.
|2,
|Press *1 times on button *2 to return to automatic mode|.
MODE
Note:
|P4,P4|When programming a new *1 program, the Timer I-35 will automatically propose
you the previous programmed *2|.
|
|To program another zone, select it with *1 buttons in automatic mode and then
switch to programming mode (Mode button)|
4. PROGRAMME READING
You can check your programming.
1.
|
|In automatic mode, select the zone you wish to program with buttons *1|.
The selected zone is indicated: |Z1|(example *1)|.
2.
|
|Press on button *1 until the pointer indicates Prog|.
MODE
1-7
3.
|
,1,7,24|Press button *1 to select the day from *2 to *3 and check your programming on
the *4-hour profile at the bottom of the display panel (see example above)|.
Time displayed correspond to the beginning of the first comfort period.
0
1
2
4.
|2,
|Press *1 times on button *2 to return to automatic mode|.
MODE
"AUTO"
5.
AUTOMATIC MODE
|
,AUTO|You pass into automatic mode by pressing the button *1 until the pointer appears
MODE
under "*2"|.
In automatic mode the timer displays time, day and the temperature level on each zone.
|24|The program applied is displayed on the *1-hour profile at the bottom of the display panel|.
6. TEMPORARY OVERRIDE
This function allows temporary modification of set-point on a zone.
Example: |1|on zone *1, the temperature level is comfort and you want to switch to ECO|.
1.
|1,
|Select zone *1 with buttons *2|. The selected zone is indicated.
Installation and Operation Manual
.
.
Auto
Prog
1
2
3
4
5
Z1 Z2
0
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
3
Publicidad
