Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Notes:
Only use the AC adaptor that is provided with this unit or ones with equal voltage. Using an
AC adaptor with different voltage or ones that are not intended for Bug Zapper may cause
damage to the unit, damage to personal property, or personal injury.
The unit can also be powered using the AC adaptor. When the AC adaptor is plugged into
both the charging port, as well as into any standard 230 Volt wall outlet, simply slide the
Power ON/OFF switch to the OFF position.
Cleaning
Before cleaning bug zapper ALWAYS makes sure that the Power ON/OFF switch located at the
back of the unit is in the OFF position.
USE AND CARE INSTRUCTION
1.
Mount the product so it is secure and stable. Mounting the product in an unstable manner
may damage the bug zapper's enclosure or lamp.
2.
The UV light will attract insects. Therefore, it is recommended that you do not place the
unit in the area that you want to protect. Rather, it is recommended that the unit be
placed between areas of human activity and the area that you want to protect.
3.
Before using or reusing the adaptor, inspect the cord carefully. Discard any products that
have cut, damaged or frayed wire insulation on the cord, cracks in the enclosure, loose
connections, or exposed copper wire.
4.
To prolong the life of the unit and promote more efficient operation, occasional cleaning
should be performed on the product. NOTE: Before cleaning the bug zapper ALWAYS
make sure that the Power ON/OFF switch located on the back of the unit is in the OFF
position and that the AC adaptor is unplugged from any standard 230 Volt wall outlet.
Clean the grids of the unit with the exhaust side of a vacuum cleaner or blowing
equipment. Be careful not to damage the grid.
5.
When storing the product carefully remove the product from wherever it has been in use
avoiding any undue strain or stress on the product connections or wires.
6.
When not in use, store neatly in a cool, dry location protected from sunlight.
7.
Do not clean this product with water or place it where it can fall into water.
Bulb does not light and/or there is no voltage on the grid.
Possible Reason:
Bulb is not seated properly in the product.
The internal battery needs to be recharged.
ACTION:
Plug the power adaptor into the bug zapper and into an approved outdoor
outlet.
There is intermittent or continuous sparking (arcing) on the electric grid.
Possible Reason(s): The gap between the grids is too small. The grid is congested with foreign
material.
ACTION:
Clean the grids with the exhaust side of a vacuum cleaner or blowing
equipment. Be careful not to damage the grid.
SPECIFICATIONS:
Fluorescent Light:
Rechargeable Battery:
AC Power Adaptor:
All manuals and user guides at all-guides.com
4 W
6V 4,5 Ah/20 hr
AC 220 ~ 230 V 50 Hz 600mA
- 5 -
ENGLISH
Publicidad
Tabla de contenido
