Alpina SF-5089 Instrucciones De Uso página 6

ENGLISH
Instruction of exchange the bulbs (F4T5/BL)
The utility life of the bulb is above 3600 hours, when you would like to change another bulb,
please make sure that the power ON/OFF switch located at the back of the unit is on the OFF
position, then use a screwdriver release extra electric charges on the High Voltage grid, later
please instruct it as below:
1. Contrarotate the small top cover of the bug zapper by hand, you could see PCB
inside.
2. Use a screwdriver to unload two screws on the PCB.
3. Move away the PCB, Then use a screwdriver to unload two screws from the
black bulb holder. Please don't destroy any lead.
4. Pull out the black bulb holder. Fetch the old bulb with a plier.
5. Insert the new bulb into the base with a plier, aim at the two holes under the
black bulb holder, insert the black bulb holder, strengthen the two screws. Then,
put the PCB on its place and strengthen the two screws, instruct the small top
cover and the body. Please don't destroy any lead.
This product is guaranteed for a period of 2 years from the date of purchase against defects in
materials and workmanship. Under this guarantee the manufacturer undertakes to repair or
replace any parts, except the bulbs and battery, found to be defective, providing the product
is brought back to the purchase address. This guarantee is only valid if the appliance has been
used in accordance with the instructions, and provided that it has not been modified, repaired
or interfered with by any unauthorised person, or damaged through misuse.
This guarantee naturally does not cover wear and tear, nor breakables such as ceramic items,
bulbs etc. If the product fails to operate and needs to be returned, pack it carefully, enclosing
your name and address and the reason for return and bring it to the address of purchase. If
within the guarantee period, please also provide the guarantee card and proof of purchase.
All manuals and user guides at all-guides.com
GUARANTEE
- 6 -