Troubleshooting - auna Radio Gaga 2.0 Manual De Instrucciones

EN
44
All manuals and user guides at all-guides.com
Resume when power on
Turn on the function for the radio to resume when powered on. Instead, the
screen will remain in main menu.
Software Update
Will show here if a software update is available for the radio. If one is
available, please select for the update to initiate.
Reset to Default
Select this option to reset your radio and revert all of the settings and
presets made. Confirm that you would like to reset the unit and its settings
by selecting "YES".

TROUBLESHOOTING

Problem
No power/function
No sound
No sound from
Bluetooth connection
Function disturbance
Possible Cause and Suggested Solution
Check whether the power is switched on or off
at the wall.
Check whether the power adapter is properly
connected to power outlet or not.
Check whether unit is set to MUTE or not.
Check whether MODE is correctly selected or
not.
Check whether cables are properly installed or
not.
Check whether external device requires
password"0000" to start with.
Switch of and unplug the unit. Leave it for 2
minutes and switch it on again.