Kit Components - Watts 009-FS Serie Instrucciones De Instalación

Kit Components

All kits include the sensor activation module and power adapter
to enable the flood sensor. Retrofit kits also include the flood
sensor and related components. If any item is missing, speak
with your account representative.
A. Sensor activation
module with an
8' 4-conductor
electrical cable,
ground wire, and
4 attachment
screws
C. Cellular Gateway
with mounting
tabs and screws
E. Included in retrofit
kits only:
• Sizes ½" to ¾" flood
sensor with captive screw
and deflector
• Sizes 1" to 1½" flood
sensor with 2 deflectors
(1" and 1¼" to 1½") and
2 mounting bolts
• Size 2" flood sensor with
deflector and 2 mounting bolts
Requirements
• #2 Phillips screwdriver for sizes ½" to ¾"
• ⁄ " Allen wrench for sizes 1" to 1½"
3
16
• ½" Wrench for size 2"
• Instrument with small tip to change DIP switch settings
• Wire stripper
• A suitable location within 8 feet of the flood sensor for
mounting the Cellular Gateway on a wall or structure,
plugging the power adapter into a GFI-protected electrical
outlet, and running a ground wire from the Cellular
Gateway to the ground point
• Cellular network connection
• Internet browser
NOTICE
The connection kits are suitable only for new or existing
installations of the specified valve assemblies.
B. Four deflectors
(new installation
kit only)
D. 24V Power adapter
(requires a 120VAC, 60Hz,
GFI-protected electrical outlet)
2