DFI Blood-Iron LanParty Bi 785G-M35 Guia Del Usuario página 14

E
English
PS/2 Ports and S/PDIF Ports
PS/2 Mouse
PS/2 KB
Coaxial RCA
Optical S/PDIF
SPDIF out
Key
Ground
+5V SPDIF in
1
PS/2 Mouse and PS/2 Keyboard Ports
These ports are used to connect a PS/2 mouse and a PS/2 keyboard.
Optical S/PDIF
The optical S/PDIF jack is used to connect an external audio output device using
an optical S/PDIF cable.
Coaxial RCA S/PDIF
The coaxial RCA S/PDIF jack is used to connect an external audio output device
using a coaxial S/PDIF cable.
Important:
DO NOT use optical S/PDIF and Coaxial RCA S/PDIF at the same time.
S/PDIF Connector
The S/PDIF connector is used to connect an external S/PDIF port. Your S/PDIF
port may be mounted on a card-edge bracket. Install the card-edge bracket to
an available slot at the rear of the system chassis then connect the audio cable
to the S/PDIF connector. Make sure pin 1 of the audio cable is aligned with pin 1
of the S/PDIF connector.
14
All manuals and user guides at all-guides.com
S/PDIF
S/PDIF
5