Timer Button; Speed Button; Turbo Button; Auto Button - atmosphere 10-1076 Manual Del Propietário

Control Panel Functions
Mode Prior to
Button Press
Air purifi er
Off
Changes to TIMER
Mode;
fan speed at
MANUAL
current setting.
Mode
After 30 minutes,
Air Purifi er turns
itself off.
Changes to TIMER
Mode with time
set at ½ hour;
AUTO
fan speed stays
at current setting.
Mode
When time is up,
Air Purifi er turns
itself off.
Changes from
present time
remaining to next
TIMER Mode
higher time in
- some or all
sequence (2, 4,
8, 12 hours*);
of the set time
Air Purifi er turns
remaining
itself off after the
new time duration
expires.
Changes to TIMER
Mode with fan
speed at 5 and
time duration at
TURBO
next higher time
Mode
in sequence (2
hours). When time
is up, Air Purifi er
turns itself off.
*If TIMER button is pressed when indicator shows 12 hours remaining, all fi ve indicator lights go off and Air Purifi er changes to MANUAL Mode.
TIMER SPEED
Button Button
No effect. No effect.
Fan speed
changes to next
speed in sequence
(1, 2, 3, 4, 5,
1...); no change
in Mode.
Changes to
MANUAL Mode;
fan speed changes
to next speed in
sequence (1, 2, 3,
4, 5, 1...)
Fan speed
changes to next
speed in sequence
(1, 2, 3, 4, 5,
1...); no change
in Mode or time
remaining.
Changes to
MANUAL Mode;
fan speed changes
to lowest setting.
RESULTS FROM PRESSING EACH BUTTON
TURBO
Button
Air Purifi er turns on
in TURBO Mode;
fan speed at 5.
After 30 minutes,
Air Purifi er turns
itself off.
Changes to TURBO
Mode; fan speed
at 5. After 30
minutes, reverts to
MANUAL Mode at
previous fan speed.
Changes to
TURBO Mode (fan
speed 5); after 30
minutes, returns
to AUTO Mode at
previous fan speed.
Changes to
TURBO Mode (fan
speed 5); after 30
minutes, reverts
to TIMER Mode at
previous fan speed
with ½-hour less
time remaining.
Changes back
to all settings in
effect before you
started TURBO
Mode.
9
AUTO
Button
Air Purifi er turns
Turns Air Purifi er
on in AUTO
on in MANUAL
Mode; fan speed
Mode; fan speed
is adjusted by
at last manual
input from Particle
setting.
Sensor.
Changes to
AUTO Mode; fan
speed stays at
current setting
until adjusted by
input from Particle
Sensor.
Changes to
MANUAL Mode;
fan speed stays at
current setting.
Air Purifi er turns
on in AUTO
Mode; fan speed
is adjusted by
input from Particle
Sensor.
Changes to AUTO
Mode; fan speed
stays at current
Turns Air Purifi er
setting (5) until
adjusted by input
from Particle
Sensor.
POWER
Button
Turns Air
Purifi er off.
Turns Air
Purifi er off.
Turns Air
Purifi er off.
off.