Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1
Disengage the slides by pushing
the black release lever that is
located on the inner member slide.
Pull the inner member slide as the
black push lever is released
(See Figure 1).
STEP 2
Install the inner member slides
to the sides of the panels in the
desired location using the (4) M6
x 6 mm screws, if installing using
32 mm system holes or use the
(4) #8-32 x 1/2" screws for other
applications (See Figure 2).
#2
#2
#2
STEP 3
Slide the outer slide member onto
the inner slide member. You will
hear a click when the slides are
re-engaged (See Figure 3).
2
FIG. 1
FIG. 2
1
8
FIG. 3
Customer Service: 800-626-1126 | rev-a-shelf.com
Cabinet Front Edge
1-15/64"
1-1/2"
(31 mm)
(37 mm)
12" (310 mm)
(For 14" deep systems)
7-39/32"
45/64"
9/16"
1-11/32"
(192 mm)
(17 mm)
(14 mm)
(34 mm)
Publicidad
