Jays s-Living Flex Manual Del Usuario página 8

LED INDICATIONS AND START UP
Power on
During start up (power ON the speaker) the power LED will flash fast.
Note: When you power ON the speaker it will always start up in Wi-Fi mode.
Search state
When the speaker is powered ON it will start by being in "search state" trying to search for and connect to the last Wi-Fi network. During this
state the LED will flash. The same will happen (flash) if the speaker is put into "Bluetooth mode", where you are now able to establish connection
with a previously paired Bluetooth device.
Setup mode or pairing mode
In "Wi-Fi mode" the speaker will automatically enter the "setup mode" within 20 seconds, if the speaker during "search state" does not
successfully re-connect to the previous Wi-Fi network.
In "setup mode" the LED will flash continuously. Same LED behavior will occur if the speaker is set into "Bluetooth pairing mode".
Playback state
During playback the LED will be ON (solid) and the color of the system LED (Purple, Blue, Green) will indicate what "mode" the speaker is in
(Wi-Fi playback, Bluetooth playback, AUX playback).
Idle mode / network standby mode (sleep mode)
LED will be breathing slowly indicating "no action" or "I am sleeping".
"Idle mode" will happen as soon as music is paused (no action).
"Standby mode" will happen if there is no action for 20 mins when plugged in and 10 mins when not plugged in. If in standby mode for 60 mins
the s-Living Flex will switch off. To switch on long press ON for three seconds.
8