3
Use
3.1 Intended use
The appliance was designed to be used in houses,
and is not fit for industrial use.
3.2 Attaching/removing the
hose
1. To attach the hose (1) pull the hose cap (4) in
the direction of arrow until it is aligned with the
housing.
• The tabs on the hose cap (4) must be seated
correctly.
2. To remove the hose (1) press on the tabs on the
hose cap (4) and pull it.
3.3 Attaching/removing the the
telescopic tube (BKS 1511 A)
1. Attach the telescopic tube (11) to the handle
(12).
2. Pull the telescopic tube (11) from the handle
(12) to remove it.
3. Push the telescopic tube adjustment latch in
the arrow direction and pull the telescopic tube
(11) to adjust its length.
Vacuum Cleaner / User Manual
All manuals and user guides at all-guides.com
3.4 Attaching/removing the
parquet/carpet brush
You can install/remove the telescopic tube (11)
from/to the parquet carpet brush (9).
3.5 Adjusting the parquet/
carpet brush
By pressing the adjustment latch located on the
parquet carpet brush (8);
• Use "
• Use "
3.6 Accessories
Crevice tool
A
3.7 Operation
1. Plug the appliance after pulling the power plug
2. Press on/off button to switch on your applian-
" position for hard surfaces and
parquet.
" for carpets.
Suitable for the cleaning of the
surfaces which are difficult to clean,
such as the areas remaining under
the sofas and furniture.
WARNING: Do not make cleaning
by using the handle' s (12) end part.
located at the back of the appliance.
ce.
7 / 79 EN