Symbol QRG SPT 1500 Manual De Instrucciones página 7

Q u i c k
To calibrate your SPT 1500:
1. Press the green power button on the front panel of your SPT
1500 to display the calibration screen.
Contrast Control
Power Button
Note: If necessary, adjust the contrast control located on the
side of the SPT 1500 so the screen is clear and readable.
2. Remove the stylus from its storage slot on the back of the SPT
1500.
3. Tap the exact center of each target that appears on the screen
with the tip of the stylus.
R e f e r e n c e
7