ARENDO 305689 Manual Del Usuario página 24

The status LED of the thermostat (E) indicates that the grill is being heated. The
light remains on until the set temperature is reached. The grill is now ready for
use.
Then, the temperature regulator is periodically switched on and off during the
cooking process to maintain the temperature at the set value.
The preheating time depends on the selected heat setting. The higher the heat
setting, the longer the preheating time.
Remove the thermostat (E) after using the appliance.
5. Cleaning and Care
Even if the appliance is not being used, disconnect the mains plug from the socket
before cleaning the appliance and/or the individual parts. Never immerse the
appliance or the individual parts in water or other liquids.
The lid and the drip tray can be cleaned with warm water and detergent or
washed in the upper compartment of the dishwasher.
The housing and the non­stick grill plate can be cleaned with a damp cloth or with
warm water, a mild cleaning agent and a soft sponge.
Caution! Allow the appliance and the individual parts to dry completely before
reusing the appliance.
6. Safety instructions and disclaimer
Never try to open the appliance to carry out repairs or modifications. Avoid
touching the live contacts. Do not short-circuit the product. The appliance is
not approved for outdoor use. Therefore please use it only in dry or covered
surroundings. Protect it from high humidity, water and snow. Keep the product
away from high temperatures.
Do not expose the appliance to sudden changes in temperature or heavy
vibrations, as this could damage the electronic components. Check the appliance
for damage before using it. The product should not be used if it was subject to
impact or has been damaged in some other manner.
24
English